FINALLY HAVE ALL THE CRX PARTS!

[admin]

Have everything done and ready to go for the powder coater! Took me a long time but we got all those bushings out. ALSO, nb miata is almost finally ready for …

[seancleary1985]

Head cam is much better

[Schrödy Brodie]

Copper ease is a good investment Ruddy.

[Dan Baker]

hit it with your purse @12:12 lmao

[Tate Goodpasture]

Me being stupid

If u owned a press,,,13:40 you do ,build table try dropping lift on to it with rod and stuff you know hahahhaha

[simi]

check the power steering fluid thats the noise….

[Brandon Floyd]

$200 press would do wonders.

[Chris S]

As soon as I saw that cracked thermostat housing I knew what was good

[Izreal 3345]

Bearings in the alt pulley is wut it sounds like on camera

[Gavin Adams]

No one:
Rudnik let’s cook marshmallows of 33 year old burning rubber.

[The Angry Italian Scotty Piffin1]

Super OG and definitely remember the JB weld on ricermiata… what a strange trip it’s been

[The Angry Italian Scotty Piffin1]

This channel rocks. The rodknock family… Chester, Ruddy and Courtney!

[Boomstruck]

Headcams are great

[That Honda Guy]

You can knock the old lower ball joints out with an air chisel. Putting them in you need to be more careful!

[That Honda Guy]

9:43 27 days Marcus…… I squinted when this frame came up.

[That Honda Guy]

6:47
Try using an chisel with a hammer shaped head. Best method is to use a press to push them out.

[That Honda Guy]

6:21 Damn, Chris here showing that forearm 💪 flex. Normally I have to drill those screws out.

[That Honda Guy]

Don’t loose that clip that holds the e brake cable! It’s important!

[That Honda Guy]

I like the head cam!

[Domanic Moreno]

have both Albertos met before? lol

[anatoly afonin]

The job weld teromostat housing was one of the few videos I started watching

[travis ellenberger]

Us a air hammer to get the bushings out

[Merica Shawn]

Like a glove is for only the way something fits not runs starts sounds lol

[Author]

Posts