GMT400 Front End Rebuild (Part 4) #ETCGDadsTruck

[admin]

This is (Episode 13) of the #ETCGDadsTruck Series. Link to (Episode 14): Link posted when available Link to (Episode 12): Link to …

[Bryson Shires]

Took me a whole minute to get the "race driver" joke ….I should not have laughed do hard

[YamFZR93]

Short Truck + Tall Eric = Extra Extra Funny Video. That was a ton of work and the truck looks great. Really enjoyed the video.

[supershark 9k]

Hey Eric I got a 03 f150 xl and the front end is sagging to my knowledge I don’t think the front suspension has even been serviced with that said I’ve also noticed some squeaking and creaking so that automatically means ball joints and I get a clacking like things metal to metal are making contact at points yet unknown so in a round about approximation what all do you think is gone just about everything on the front ?

[Eric Ernst]

I have a very similar bearing packer. I love it. I think it's a lot better than the old way of grabbing a wad of grease in your palm. I like that it ensures you have a fully packed bearing.
Looks great. Now I need to rebuild my front suspension too.
Dude, you are going to be blown away by the new engine. I can tell that old tbi 350 is a turd. I'm so glad I upgraded mine with a roller cam and heads.

[John Pike]

Awesome brother. Love these videos!

[John Ebey]

Hah! My favorite thing when someone told me "It's a Chevy, they're all the same" was to hand them a water pump for a Corvette for their 350. You still have to do your math, even with a Chevy.

[john smith]

great work eric lov ur videos

[J. Hunto’s Garage]

I can't remember if the ABS unit is still in the truck. Yes? If so, I'd attribute the great pedal feel to that. If it's still there what do you think is the cause for the spongy pedal? It comes and goes on my '99 Suburban.

[Tommy C]

Those wheel guards on your seat…. I need those in my life!!!

[athhud]

Whether I modified them or not, Summit WOULD take those Spindles back or just eat the cost of the new ones if I were dealing with them…

[Brandon Adkins]

I will watch ETCG videos. I will watch them day and night. I will never click on the ads. I will watch ETCG.

[Big Dog50001 Automotive]

Eric, you’re doing it all wrong! 😉

[MOTORBIKE MADNESS]

Splash shield? I thought they were called dust covers.

23:19 Manical laugh Manical laugh
https://www.youtube.com/watch?v=R6MlHxAzLXA

[VBshredder]

Looking forward to the "we finally install a headliner" episode

[Bella Luna]

The stance from the front at the end of the video looks good. 😁

[Tommy Oz]

The ute is looking great mate!

[Dylan Lewis]

Doing something wrong a few times is just part of the process of fixing something. It's frustrating, but the end result of a high-effort job is very satisfying. Nice work, Eric!

[Silas Marner]

Nice work Eric! I put Bilsteins on my E150 4.6L. The van handles AMAZINGLY.

[RickFortune]

i… will… watch… ETCG… videos…

[Miguel Cortes]

Hey Erick what where did you get the wall charging station on your bench?

[Jesse Silva]

Is your finger okay?

[Suj]

Great stuff

[Ross Banner]

Eric your inner tie rods are on the wrong way. The nuts should be on the forward side of the centerlink. Watch PART 1 and you'll see. You may need to turn the centerlink around too so the taper for the inner tie rod studs will be correct.

[VW Insanity]

I find it interesting that you had to grind on these spindles when I did the same exact thing on my 91 they popped right in with no clearance issues. Sorry I don't remember what brand they were unfortunately 🙁

[Mix Pick]

I was going to say something nostalgic like "your videos have gotten better with age" but the heck with that! These latest ones have gone exponential! Dunno if it's the cold or the cold medicine but it's taken these to a whole new level. Great stuff and it's great to know you are human with a mistake or two… lol

[Bryant Morton]

I will watch ETCG videos. I will watch them day and night. I will click on the ads. Click on the ads

[JamesonDIY]

LMAO 23:11

[Adam Wolfe]

I find myself 75% of the time having to do the same thing with brake pads it’s like the coating adds too much extra thickness and they don’t find nicely

[mikey mike]

I think the springs on the right side of truck are slightly longer than on the left to help compensate for road crown….Ride more level

[David Miranda]

Oh man, that new height is just right! Love it too, Dad will be proud! 👏👏

[Amjed Al iraqi]

Thank you Dear Eric , I am a successful person and I work hard and sincerely and I am following you from Iraq thank you for all your successful work

[J. Hunto’s Garage]

I am entertained. 🙂

[Author]

Posts